BLU Studio 6.0 LTE Y650Q Android 4.4.2 KitKat firmware flashfile stockrom

BLU Studio 6.0 LTE Y650Q Android 4.4.2 KitKat

QualComm CPU Flashing is carried out in two phases:-
1- Driver Installation
2- Software Upgrade
Driver Installation:
1- Download and install Qualcomm driver. While installing driver avoid using cable for successful installation.
2- After installation, connect Phone to PC using USB cable.
3- While connecting to PC, phone should be switched off and press volume up & down as boot key.
4- If it makes Qualcomm port, then driver has been successfully installed.

Software Upgrade:
1- Download the QPST tool & driver.
2- Make sure your device has the Power to support flashing.
3- Run QFIL tool.

4- Click on Browse under the Programmer path to select MBN File.

MBN File Format:

5- As soon as the MBN file is selected, Select Build will automatically select the Update or Stock ROM.
6- Click on Load XML, select rawprogram_unsparse_without_qcn.xml and then choose Patch0.xml
Load XML comes with two option:
a- rawprogram_unsparse_without_qcn.xml : On choosing this file, data will not be lost.
b- rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI and WiFi/Bluetooth Address.
7- Switch off the device and connect it to PC by pressing Volume up & down key.
8- Click on Select Port and choose the port.

9- Click on Download to start flashing.

10- Unplug USB cable, when Finish Download appears.

Note: Do not unplug cable when Reset Phone or waiting for Reset Phone is in the process.


All product names, logos, and brands are property of their respective owners. All company, product and service names used in this Blog are for identification and learning purposes only.

Related Firmware

Share firmware
  • 1

4 thoughts on “BLU Studio 6.0 LTE Y650Q Android 4.4.2 KitKat firmware flashfile stockrom”

  1. Good day admin, thanks for the update, i really appreciate if you can send me the password for this file BLU Y650Q. GOD bless you. please reply asap

Leave a Comment