Samsung Galaxy J1 SM-A300H Stock Rom Firmware Flash File 5.0.2
www.androidduniya.com reminds readers it will not be held responsible for any damage to the device during or after installation of Samsung Galaxy J1 SM-A300H Stock Rom Firmware Flash File 5.0.2 using Odin. Readers are advised to proceed at their own risk because of hardware faults.
Initial Requirements to install Samsung Galaxy J1 SM-A300H Stock Rom Firmware Flash File 5.0.2
How to Install Samsung Galaxy J1 SM-A300H Stock Rom Firmware Flash File 5.0.2
Boot your Samsung Galaxy J1 SM-A300H into Download mode
Firstly, Switch off your phone.
Secondly, Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
Thirdly, Press Volume Up on the warning screen to accept it and boot into Download mode.
Once your Samsung Galaxy J1 SM-A300H is in download mode, connect it to the PC via USB cable. The Samsung Odin window on PC should detect the phone and show an”Added!!” message.
Now, extract the .zipped Samsung Galaxy J1 SM-A300H Stock Rom file you have downloaded to get the Odin flashable.tar file inside. Skip this step if you already have a .tar file of the Samsung Galaxy J1 SM-A300H 5.0.2 Stock Rom .
Click on the AP tab on Odin window and select the .tar.md5 file from the Samsung Galaxy J1 SM-A300H 5.0.2 Stock Rom file that you have downloaded or can download it from the given below Link. Note:don’t play with any other options on the screen. Only you have to connect your Samsung Galaxy J1 SM-A300H device and select the PA tab.
Click the Start button on Odin and wait for it to finish the process. Once it has finished successfully, you’ll see a pass message on the Samsung Odin screen.
Finally, the device will automatically reboot after Odin complete the flashing. Now disconnect your Samsung Galaxy J1.